A Guide to Essential Airsoft Cleaning & Maintenance

Home
Surplus StoreA Guide to Essential
Airsoft Cleaning & Maintenance

Airsoft gun maintenance is important for keeping your kit in prime condition; here’s a quick guide to some basic maintenance and cleaning.


Airsoft guns can take a battering during a skirmish; this is something which is fairly unavoidable. Crawling through muddy forests can take its toll on your beloved rifles, so giving them some TLC is important.

Knowing how to keep your airsoft gun clean, which ammo is best to use and how to unblock them are all key to keeping your guns in good condition.

With this in mind, here is a quick guide to airsoft gun maintenance, which should help you to keep your kit in prime condition.


Airsoft gun laying on grass ready for cleaning
Cleaning

When it comes to cleaning your airsoft gun, it is important that you steer clear of strong cleaning products. These can damage the exterior of the weapon, stripping it of its paintwork and potentially damaging the delicate mechanisms that keep it firing. To keep it clean, you should only need to use a soft, damp cloth and a bit of elbow grease!

The exterior of airsoft guns will only require minimal cleaning, but the barrel is one of the most important parts of the gun and will need fairly regular attention and lubricating.

To properly clean the barrel, spray a small amount of 100% silicone spray onto a cleaning patch on a cleaning rod and insert into the barrel AFTER you have turned off the hop up. If the hop up is on, you can damage it, and the cleaning rod can become stuck.

In fact, it is better for the barrel if you completely remove it from the AEG and hop rubber. However, this can damage the hop rubber if done improperly or too often; it is not recommended to do this every time or if you are not completely confident in what you are doing.

When it comes to cleaning the barrel, use a back and forth motion, and then remove the cleaning rod. Once you are satisfied it is clean, attach a new, dry cleaning patch to remove any excess residue. Once the patch comes out clean, test fire the gun and re-set your hop.

Note - If you wish to perform maintenance on the interior of the gun’s gearbox, it is strongly recommended that you use a professional, as doing it yourself could result in damage to the gun or the risk of voiding the warranty.


Airsofter aiming down the sights of a gun
Ammunition

Only use high-quality BBs, as poor-quality brands can damage both your gun and the barrel. High-quality airsoft guns are designed to use 0.2-gram BB’s or heavier. Any BBs lighter than this can jam or break in the gun, and cause over hopping and inaccuracy.

It is also important that you NEVER reuse your BBs, as they become deformed once fired which can contribute towards breaking your airsoft gun.


Taking Care of Magazines

Before you load your magazine, you should always check the user manual of your gun and follow their advice, even if you are the most seasoned of airsofter. However, there are a couple of general rules worth remembering:

• Keep your magazines and BBs away from dirt and debris. This will help to ensure no foreign bodies get stuck in/on them.

• Only use new, clean BBs. Dirty BBs or ones which have been fired before and are now deformed can harm the mechanisms of your gun, causing magazines to jam and potentially causing severe damage to your gun.


What to Do in Case of a Jam

Unfortunately, no matter how well you look after it, your gun will jam. When this happens, it is important that you know what to do. If a BB jams in your gun, you need to stop firing immediately. If you continue firing, it could lead to a broken gear or piston, which is a much bigger (and more expensive!) problem to fix.

Next, you should completely turn off your hop up and insert the reverse end of your cleaning rod (which should be angled) into the barrel with the angle facing the feed tube in the magazine well.

Turn the gun upside down, look inside the magazine well and gently move the rod inside the barrel. By doing this, you should see the BB pop out of the feed tube and then see the end of the cleaning rod. Test fire the gun, and if it sounds good, crack on! If not, or if there is more than one BB stuck inside the barrel which you can’t remove, cease firing again and get in contact with a professional.

Although frustrating, it is sometimes important that you leave it to the professionals, as you could cause irreversible damage by poking around inside the gun.

Hopefully this guide has given you plenty of information to go on and use in the future!



Keep upto Date with whats happening in airsoft with the Airsoft Odyssey Blog via Twitter:


Check out Surplusstore for kit. supplies and Airsoft by clicking the banner below:
Surplus Store
A Guide to Essential Airsoft Cleaning & Maintenance| Airsoft Odyssey

WE Makarov Test & Review

Armoury KitBag
WE Tactical Training International
WE Makarov
Test & Review

- Reviewed by Rhino


WE Makarov PistolThe Makarov is one of the latest pistols to come out of WE that I have been asked to test and review. WE have really upped the ante over the last couple of years with manufacture and quality control of their pistols, rifles and ancillaries. As most of their pistols are compatible with Tokyo Marui they have inevitably been benchmarked against the TM products which is never easy. Anyway on to my test results and review.

On opening the box you get the usual egg box type packaging which keeps everything in place and protected. In the box there is the pistol itself, magazine, manual and a barrel extension and silencer ( more on these items later). On close inspection of the pistol the finish is very neat and tidy with a matt black paint job and some basic trades and a couple of serial numbers. It’s not until you hold it you realise what a neat little unit this is. People with larger hands may struggle with this as the pistol grip is very short. The magazine is again very neat and tidy and possibly the smallest pistol mag I’ve ever seen.

WE Makarov Pistol with SuppressorNow stripping this pistol is quite different to the usual Glock or 1911 strip down and it’s a little bit tricky. Pull down the trigger guard then click the hammer back and push the slide right to the back and lift off taking care you don’t snag the slide on the fire nozzle. This then gives you access to a very basic set up with the barrel and hop unit still attached the lower. The hop adjustment is again totally different to any I’ve seen on a WE pistol. No wheel, just a little slider at the back of the hop unit which is very easy to adjust. Reassembly was just as tricky as the strip down so be careful.


WE Makarov Pistol Right sideSo I filled the magazine with WE green gas and filled the magazine with the 16 bbs it takes, the bbs were the Nuprol ones. On firing the first thing I noticed was how snappy and crisp the blow back was as the slide had a very short stroke, it was also quiet. On the chrono test I got the usual 270-280fps with the mag at room temperature which is what we come to expect from WE pistols. Now this is where things got really interesting. As I mentioned earlier this Makarov comes with a barrel extension and silencer which both just screw onto the inner and outer barrels so no need to strip the unit. So I refilled the mag with gas and bbs and put it through the chrono, the results were astonishing. The fps had increased to 365-380 and I checked this at least three times and it was whisper quiet. So if you’re planning to skirmish this pistol I recommend using a low power gas like 144a. I got two bb reloads to one gas fill as the mags are very small in keeping with the design of the pistol.

WE Makarov Pistol Left sideThis little pistol really puts a smile on your face when you fire it as it is very snappy and sounds great. It also looks very good especially with the suppressor fitted and the compact size makes it ideal for concealing at MILSIM events etc. The only down sides to this pistol that I can see are it’s compact size will put off people with larger hands and the strip down is a little tricky. But it’s certainly on my shopping list, Enjoy!



The test pistol was kindly supplied by Milspec Solutions and is available now on their website.

Follow Airsoft Odyssey on Twitter for all the latest news & reviews:


Checkout the Milspec website by clicking the banner:Milspec Solutions
This review is copyright 2015 by Yosser's Airsoft Odyssey © & Rhino and may not be copied or reproduced without permission. Pictures copyright 2015 by Author. You may link to this page
KEEP UP to DATE with Airsoft Odyssey via all these Multi-Media Outlets - please click the icons and Support the BLOG on:

WE Makarov Pistol Review| Airsoft Odyssey

SA Gear TShirts

News Archives
SAGLogoSAGear
Military Themed
T-Shirts




Stay Alive Gear - SAG now offer a great range of military themed T-shirts - a great statement for airsofters!

Check out the range on the website - all available in a range of base colours and sizes
http://sagear.eu/en_US/c/T-shirts/24?currency=EUR


Speak Sotly and Carry a Gun:


Don't Try to Run You'll Only Die Tired:

Have Gun Will Travel:

To keep Up to date on the latest News & Reviews you can follow the blog via Twitter:




SAG have sell loads of tactical gear - check them out for pouches, packs, bags and more on the website:
http://sagear.eu/


Stay Alive Gear have some great tactical gear - useful for any airsofter in the field! Check them out on the website http://sagear.eu/
SAG
STAY in TOUCH with Airsoft Odyssey via all these Multi-Media Outlets:


Airsoft Meetup IWA

News Archives
IWA logo4th AIRSOFT MEETUP
@
IWA 2015






This time of the year we prepare for the biggest gun show in the world, IWA 2015 in Nuremberg Germany. IWA means another highlight of the year, the Airsoft Meetup on Sunday!

We are proud to announce that the Airsoft Meetup 2015 is definitely on! The annual gathering of airsoft media to listen and ask questions at the airsoft industry under one roof is going on its 4th year. This event takes place during the IWA & Outdoor Classics, the massive international outdoors, firearms, tactical gear, and airsoft event in Nuremberg, Germany.

The who's who in airsoft in Europe as well as internationally will be there, including some of the winners of the 5th Airsoft Players' Choice Awards as the awards ceremony takes place during the Airsoft Meetup.

If you are going to the IWA & Outdoor Classics 2015, then you're most definitely invited to Airsoft Meetup 2015. Do know you are invited?

Get your tickets and more details here: http://airsoftmeetup.com/


IWA Meetup
IWA 2015 Meetup Organised by NLAirsoft

SO WHO CAN ATTEND THE AIRSOFT MEETUP?
Anyone who has access as a trade or media visitor to the IWA & Outdoor Classics 2015 and has interest in airsoft can attend the Airsoft Meetup:

If you are an exhibitor at the IWA 2015 & Outdoor Classics with the airsoft market as one of your segments, you are invited to join us and mingle and given the opportunity to present your products or plans either via slide presentation or a "show and tell" to the airsoft media and other interested individuals and purchasers. If you intend to give a presentation, please contact us immediately so that we can schedule it (15 minutes). We still are still searching for some additional speakers.

There are limited slots for this meetup as we have 75 seats available. In order to get your seat, better get your ticket now.

Where to find the Airsoft Meetup?
IWA 2015 & Outdoor Classics Airsoft Meetup
8 March 2015 (Sunday)
1300 to 1630H
Hongkong Room
Nürnberg, Messe
Level 1, NCC Ost


To keep Up to date on reports you can follow the blog via Twitter:


Checkout Airsoft MeetUp website:


KEEP UP to DATE with Airsoft Odyssey via all these Multi-Media Outlets - please click the icons and Support the BLOG on:

Krytac @ BAS 2015

News Archives
Krytac AEG's
First sight in UK @ BAS 2015




Shield Firearms and SightsShield Firearms and Sights
Hiding away in one of the main gun halls and not even in the ‘airsoft village area’ the boys from Airsoft Action noted a few ‘hidden’ or possibly ‘disregarded’ airsoft gems on the SHIELD Firearms and Sights stand – to save them from being overlooked or missed a couple of them had a ‘repatriation’ to the Airsoft Action stand where they could be appreciated by airsofters.

This meant that the relocated Krytac Trident SPR and SDP was able to garner a lot of attention from airsofters visiting the Airsoft Action stand – these were possibly the first instances in the UK of these Krytac branded AEGs. The SDP was certainly getting a lot of attention, it just looks so different from other CQB type models. The guys at SHIELD Firearms and Sights stand still had the Trident PDW and CRB models on display and Ken Saville assured us that all these models should arrive in UK soon with distribution via SHIELD (for trade enquiries please contact ken@shieldpsd.com.

Pic below: Krytac Trident PDW & Trident CRB:

Checking these AEGs out (but keep in mind we didn’t fire them) the quality seemed spot on and well finished. I was certainly impressed.

Trident SDP
First impressions:
Trident SDP
Compact design, lightweight and full metal with ambi fire selector and locking bolt with access to the numbered rotary hop unit with 15 settings. The battery is housed in the unique buffer tube. The AEG is fitted with a mosfet which should help protect trigger contacts and the receiver is stamped with the Krytac logo and each AEG is individually serial numbered.


Trident SPR
Trident SPR
With a 14.5” barrel and a 13” free floating DEFIANCE keymod hand rail the player is spoiled for choice for custom options on this AEG. Again a rotary hop up with 15 adjustment settings accessed via the locking bolt. Batteries are held in the stock and you can use nun-chuck style or small lipo brick battery at the rear of the stock in front of the buttpad (or a stick battery in the buffer tube).


These were great looking AEG’s and appear well finished – initial thoughts on pricing are lower £200 bench mark for the SDP and upper £200 for the SPR – however these are only best guesses at this point.

Update from the boys at Airsoft Action Magazine...the first UK review of these AEGs will be in the next issue of the magazine out 12th March.

Follow new posts on AIRSOFT ODYSSEY via TWITTER:



GunFire.Pl
KEEP UP to DATE with Airsoft Odyssey via all these Multi-Media Outlets - please click the icons and Support the BLOG on:
This article is copyright 2015 by Yosser's Airsoft Odyssey © and may not be copied or reproduced without permission. Video & Pictures copyright 2015 by Ellie T Dog Studios. You may link to this page
Krytac @ British Airsoft Show - first look| Airsoft Odyssey

Military1st Flectarn SWAT Retail AAF2013 Milspec Solutions Raptor Airsoft Mad Badger Airsoft Airsoft Hub FaceBook King Arms Flashlight Heaven ASG Ultimate Series UKAPU SWAT Urban Airsoft SQd BritKitUSA A2day.com Intelligent Armour VTG banner AirsoftExchange.co.uk GuayGuay Airsoft Grab Graphics Airsoftology Helikon-Tex Raptor Airsoft

Featured Video

ClustRMap

Popular

Twitter

Helikon Trooper SoftShell Review

ASG MAC10 Review

ASG MAC10 Review

Posted by Yosser
19-10-2012 | ADD COMMENTS

VTG NOW Available

VTG NOW Available

Posted by Yosser
09-10-2012 | ADD COMMENTS

DIY Pistol Case

DIY Pistol Case

Posted by Yosser
10-09-2012 | ADD COMMENTS